Seamax Portable12V SUP-20D Electric Air Pump for Inflatable SUP, Kite and Inflatable Boat www.seamaxmarine.com 1877-907-7766
Page 8
Troubleshooting
We recommend to reconnect the Power Cord for fast check before troubleshotting!
Fault Inspection Solution
The air pump
cannot be started
normally.
1. The power source is not
plugged properly.
2. The fuse in DC plug (7) is
burnt out.
3. Overheating or overload.
1. Make sure the connect to the 12V DC socket.
2. Change the fuse.
3. Take off the Sand Cap from the pump intake or outtake. Cool
the motor and restart it. Turn on the pump in the air to force it
fast cool down.
Slow or abnormal
inflation.
1. Check whether the hose is
blocked or cracked.
2. The joint between the
hose and air pump or
inflatable product is not
installed properly.
3. Make sure the power
source meets the pump’s
requirements 12V 15A
1. Change the hose or make it unblocked, and check whether the
hose is cracked.
2. Reinstall the hose or valve adaptor, put the right size O ring
3. If the problem cannot be solved, please contact with the
manufacturer or its service agent or the similar authorized
personnel.
4. Do NOT use compact AC to DC wall convertors to power the
pump. Connect the pump car charger adapter directly to a car’s
charger socket. Or use a well charged minimum 12V 7AH external
lead acid battery with the optional 12V battery connector.
Qualified Pump
Power Source
Non-Qualified
Power Source
To Next Page
Loading...
