Sears Craftsman 113.299040 User Manual

Sears
owners
manual
MODEL NO.
113.299142
SAW ON LY
113.299040
SAW WITH LEGS
TWO TABLE EXTENSIONS
AND MOTOR
113.298470
SAW WITH LEGS
ONE TABLE EXTENSION
AND MOTOR
;eria
Number
Model and serial
number may be found
at the left-hand side
of the base.
You should record both
model and serial number
in a safe place for
future use.
CAUTION:
Read GENERAL
and ADDITIONAL
SAFETY
INSTRUCTIONS
carefully
CRRFTSMRN+--_
IO-INCH TABLE SA W
• assembly
• operating
• repair parts
I
Sold by SEARS, ROEBUCK AND CO., Chicago, IL. 60684 U.S.A.
Part No. 62588 Printed in U.S.A,

Sears Craftsman 113.299040 Specifications

General

Brand	Sears
Model	Craftsman 113.299040
Category	Saw
Language	English

Summary

GENERAL SAFETY INSTRUCTIONS FOR POWER TOOLS

KNOW YOUR POWER TOOL

Understand the tool's application, limitations, and specific potential hazards.

KEEP GUARDS IN PLACE

Ensure all guards are properly fitted and aligned for safe operation.

WEAR PROPER APPAREL

Wear appropriate clothing and safety gear to avoid entanglement with moving parts.

USE SAFETY GOGGLES

Always wear safety goggles compliant with ANSI Z87.1 to protect eyes from flying debris.

ADDITIONAL SAFETY INSTRUCTIONS FOR TABLE SAWS

KICKBACKS

Learn how kickbacks occur and how to prevent them to avoid serious injury.

PROTECTION: EYES, HANDS, FACE, EARS, BODY

Comprehensive safety measures for personal protection during saw operation.

KNOW YOUR CUTTING TOOLS

Maintain sharp, properly set cutting tools to prevent binding and kickbacks.

MOTOR SPECIFICATIONS AND ELECTRICAL REQUIREMENTS

CONNECTING TO POWER SOURCE OUTLET

UNPACKING AND CHECKING CONTENTS

ASSEMBLY

CHECKING BLADE SQUARENESS TO TABLE

MOUNTING SAW

ALIGNING RIP FENCE

INSTALLING BLADE GUARD

Steps for correctly fitting the safety blade guard assembly.

MOUNTING THE MOTOR

INSTALLING BELT GUARD

GETTING TO KNOW YOUR SAW

ON-OFF SWITCH

RIP FENCE

REMOVING AND INSTALLING SAWBLADE

BASIC SAW OPERATION USING THE MITER GAUGE

CROSSCUTTING

REPETITIVE CUTTING

MITER CUTTING

USING THE RIP FENCE

RIPPING

Guide to cutting wood lengthwise along the grain.

RESAWING

RABBETING

ADJUSTMENTS

MITER GAUGE

HEELING ADJUSTMENT or PARALLELISM OF SAWBLADE TO MITER GAUGE GROOVE

BLADE TILT, OR SQUARENESS OF BLADE TO TABLE

Adjusting the blade for precise 90° or angled cuts.

MAINTENANCE

TROUBLE SHOOTING

TROUBLE SHOOTING -- GENERAL

Common problems and their solutions for general saw operation.

TROUBLE SHOOTING -- MOTOR

Diagnosing and resolving motor-related issues and power problems.