Sears Craftsman 113.248211 - User Manual

Iv
Save This Manual For
Future Reference
_ARS
owners
manual
Model No.
113.248211
Single Speed Band Saw
with Leg Set
Model No.
113.248321
Two Speed Band Saw
with Leg Set
Serial
Number
Model and serial number
may be found at the
left-hand side of the base.
You should record both
model and serial number
in a safe place for future
use.
FOR YOUR
SAFETY:
Read ALL
INSTRUCTIONS
CAREFULLY.
113.248211
/
/ t _\x
/
/
/
V
113.248321 _i
SEARSI CRRFTSMRN
12-1NCH BAND SAW
, assembly
° operating
° repair parts
Sold by SEARS, ROEBUCK AND CO., Chicago, IL. 60684 U.S.A.
Part No, SP5687 Printed in U.S.A.

Summary

Warranty Information

Safety Signal Words

Defines DANGER, WARNING, and CAUTION terms for safety instructions.

Before Using the Saw Checklist

Lists critical steps and checks before operating the band saw.

Installing and Moving the Band Saw

Pre-Use Inspection Procedures

Details on inspecting the saw for damage and ensuring safe operation before use.

Preventing Jams, Slips, and Blade Breakage

Safety Attire and Practices

Eye Protection Requirements

Emphasizes wearing ANSI Z87.1 compliant safety goggles.

Safe Operation While Saw is Running

Preventing Careless Mistakes

Warns against over-familiarity leading to mistakes and emphasizes alertness.

Handling Jammed Material Procedures

Electrical Connections and Safety

Proper Grounding and Outlet Requirements

Explains the importance of proper grounding and the use of 3-prong outlets.

Motor Safety Protection

Assembly and Alignment

Attaching Leveling Feet

Attaching the Leg Set

Mounting the Motor

Connecting the Motor Wiring

Selecting Blade Speed (Model 113.248321)

Recommended Speed Settings

Changing Blade Speed Settings

Getting to Know Your Band Saw Controls

Warning Label and Control Functions

Identifies warning label and explains key controls like tension, bevel, and guides.

Installing the Band Saw Blade

Blade Installation Preparation

Aligning Blade and Guide Assemblies

Blade Tension and Tracking Adjustment

Setting blade tension and adjusting the tracking for proper wheel alignment.

Mounting the Front Table

Squaring Blade to Table

Location and Function of Controls

On-Off Switch and Bevel Controls

Explains operation of on-off switch, bevel lock, and handwheel for angle adjustment.

Basic Band Saw Operation

Pre-Operation Checks and Safe Cutting

Recaps checks, safety, and provides guidance on safe cutting practices.

Sanding Attachment Installation

Sanding Platen and Belt Installation

Installing 1;16 Inch Blade and Guides

Preparation and Non-Metallic Guide Installation

Maintenance and Lubrication

General Saw Cleaning and Care

Troubleshooting Common Band Saw Issues

Blade Tracking, Speed, Dullness, and Vibration

Addresses common problems related to blade performance and saw operation.

Troubleshooting Motor Issues

Motor Power, Noise, and Starting Problems

Frequent Fuse;Breaker Tripping Solutions

Sears Craftsman 113.248211 Specifications

General

Type	Table Saw
Model Number	113.248211
Blade Diameter	10 inches
Motor Power	1.5 HP
Voltage	120V
No Load Speed	3450 RPM
Max Cut Depth at 90°	3 inches
Arbor Size	5/8 inches
Rip Capacity	24 inches