To Next PageTo Next Page
Need help?Do you have a question about the Sears Craftsman 113.199200 and is the answer not in the manual?
General| Model Number | 113.199200 |
|---|---|
| Type | Table Saw |
| Blade Diameter | 10 inches |
| Motor Power | 1.5 HP |
| Voltage | 120V |
| Amps | 13 A |
Understand tool applications, limitations, and specific potential hazards.
Ensure proper grounding of all electrical tools for operator safety.
Avoid loose clothing and wear safety gear to prevent entanglement.
Always wear safety goggles compliant with ANSI Z87.1.
Follow specific steps for safe installation and setup of the radial saw.
Key advice on avoiding accidents by following setup and operating instructions.
General practices like avoiding awkward positions and never climbing on the saw.
Attaching and leveling table mounting support channels for accuracy.
Adjusting the column tube in the support to remove looseness.
Ensuring the carriage travels in a straight line for accurate cuts.
Explains how to use the elevation crank to adjust blade depth.
Details on indexing and locking the arm for miter cuts.
How to adjust and lock the motor for bevel angle cuts.
Instructions on operating the power switch and using the safety key.
Procedure for cutting a groove in the table and fence for blade clearance.
How to perform a standard crosscut using the radial saw.
Instructions for ripping wood along the grain with the fence.
How to adjust the bevel lock lever for proper locking action.
Adjusting the yoke lock handle to eliminate play between parts.
Steps to adjust carriage bearings for smooth movement and proper alignment.
Addresses problems like inaccurate cuts, misalignment, and loose components.
Resolving issues like rough cuts, blade heel, and incorrect bevel angles.
Diagnosing and fixing motor-related issues like not running or overheating.
Exploded view and parts list for the leg assembly.
Exploded view and parts list for the arm assembly components.
Exploded view and parts list for the blade guard and antikickback assembly.
