Need help?Do you have a question about the Sears 103.0403 and is the answer not in the manual?
Identifies the specific model numbers for the jig saw, 103.0403 and 103.0404.
Lists parts that are standard and can be purchased from local retailers.
Details parts for rip fence and table extensions for the jig saw.
Lists components for the lower roller guide assembly of the jig saw.
Identifies parts that are sold exclusively as accessories for the jig saw.
Instructions for lubricating the jig saw, including oil type and filling procedure.
Guidance on reassembling the jig saw after shipping, focusing on table attachment.
Information on motor speeds and recommended operating speeds for the jig saw.
Details on the two-part motor mounting system, including floating and adjusting mechanisms.
Explanation of the pump mechanism, its mounting, and its role in dust blowing and blade tension.
Instructions for adjusting blade tension using the tensioner and ball crank.
Guidance on adjusting the saw blade roller guide and hold-down spring.
Step-by-step instructions for inserting and securing saw blades into the chuck.
Instructions for inserting and using round shank files in the jig saw's chuck.
Procedures for tilting the table and locking it at desired angles using the trunnion.
Information on aligning and adjusting the overarm for normal sawing and cutting capacity.
Guidance on placing rubber insulators to level the saw and dampen vibrations.
Instructions for attaching and using the sabre sawing accessory.
Information about available accessories, including fence and table extensions.
To Next Page
General