Sears Craftsman l 315.10951 User Manual

Explains the safety concept of double insulation in power tools, eliminating the need for grounding.

Lists features such as bevel/depth adjustment mechanisms and directed airflow for visibility.

Warns users to read and understand all instructions thoroughly before operating the tool.

Emphasizes that servicing double insulated tools requires extreme care and qualified technicians.

Describes the lock-off switch that prevents accidental starting by requiring a button press.

Step-by-step instructions for correctly installing the saw blade onto the spindle.

Provides instructions on how to safely remove the saw blade from the tool.

Explains the critical safety function and importance of the lower blade guard.

Explains what kickback is and provides methods to prevent it during operation.

Details how to set the correct blade depth for all cuts to ensure safety and performance.

Guides on holding the saw, supporting work, and maintaining control for safer operation.

Advises keeping the power cord clear of the cutting path to prevent snagging and accidents.

Warns that contacting the work before the blade reaches full speed can cause dangerous kickback.

Explains how to use the saw base notch for accurate alignment during cuts.

Advises on using a rip guide for rip cutting to prevent blade twisting and kickback.

Details how to perform bevel cuts and adjust the angle of the saw blade.

Warns to set bevel to zero before making a pocket cut to avoid loss of control and injury.

Warns against tying the lower blade guard in a raised position, as it leaves the blade exposed.

Stresses the importance of using only identical replacement parts for servicing the tool.

Provides step-by-step instructions for safely replacing the power cord or switch assembly.

Advises against using solvents on plastic parts as they may be damaged by commercial solvents.

Provides guidance on selecting appropriate gauge extension cords based on length for optimal power.

Discusses the importance of keeping saw blades clean and sharp for efficiency and safety.

Indicates that the model number is located on a plate attached to the motor housing.

Lists all parts of the circular saw with their corresponding key numbers and descriptions.

Advises contacting a Sears Service Center for any repair parts or service needs.

Details the process and required information for ordering replacement parts from Sears.