Sears 315.172040 User Manual

Details the warranty terms for the Craftsman Sabre Saw, covering satisfaction and commercial use.

Explains the concept of double insulation in electric power tools and its safety benefits.

Lists essential safety rules and instructions before operating the equipment to prevent injury.

Advises reading the manual to understand tool applications, limitations, and specific potential hazards.

Emphasizes guarding against electrical shock by avoiding contact with grounded surfaces.

Covers keeping the work area clean, well-lit, and free from children and visitors.

Stresses wearing safety glasses, hearing protection, and appropriate apparel.

Proper handling, securing work, and avoiding overreaching for safe operation.

Guidelines for keeping blades sharp, hands clear, and inspecting cords for damage.

Emphasizes staying alert, checking parts, and avoiding operation under the influence.

Proper selection and use of extension cords, including outdoor requirements.

Instructions on using only identical replacement parts and checking tool condition.

Familiarize yourself with the saw's operating features and safety requirements before use.

Explains how to use the main switch trigger and the lock-on button for continuous operation.

Stresses the importance of wearing safety glasses or goggles to prevent severe eye damage.

Describes how the variable speed switch controls speed and torque for different applications.

Explains the location and use of the built-in compartment for storing extra saw blades.

Step-by-step instructions for safely removing and installing saw blades.

Guidance on resting the saw base, applying pressure, and avoiding forcing the tool.

Covers scroll cutting, making straight cuts, and adjusting for angle (bevel) cuts.

Recommends proper wire gauge for extension cords to minimize power loss and overheating.

Explains plunge cutting, splinter-free cutting, and techniques for cutting metal.

Advice on cutting metals, chip removal, and fire hazards from oily cloths.

Provides a guide to selecting specific blades and speeds for different materials and cuts.

Instructions on cleaning plastic parts and avoiding damaging chemicals.

Advises against using the tool on fiberglass or similar materials due to accelerated wear.

Illustrates the various components of the sabre saw with key numbers for identification.

States that the tool's bearings are factory-lubricated for life and require no further lubrication.

Lists all parts of the sabre saw with their corresponding part numbers and quantities.

Clarifies which parts can be serviced by the customer and which require a qualified technician.

Provides instructions and phone numbers for ordering replacement parts directly from Sears.

Lists essential details like part number, model number, and description required when ordering.