To Next PageTo Next Page
Need help?Do you have a question about the Sears Craftsman 315.11881 and is the answer not in the manual?
General| Model Number | 315.11881 |
|---|---|
| Type | Table Saw |
| Blade Diameter | 10 inches |
| Table Size | 20 x 26 inches |
| Arbor Size | 5/8 inches |
Guidelines for servicing double-insulated tools and using original factory replacement parts.
Essential safety precautions and guidelines for operating the circular saw.
Recommendations for selecting appropriate extension cords to maintain power and prevent overheating.
Step-by-step instructions for securely attaching the saw blade to the spindle.
Advice on keeping saw blades clean and sharp for efficient cutting.
Procedure for initiating a cut, guiding the saw, and completing the cut.
How to correctly adjust the saw's cutting depth for optimal performance.
Guidance on performing cross cuts and rip cuts using the saw's guides.
Instructions for adjusting the saw for bevel cuts between 0 and 45 degrees.
Steps for executing pocket cuts by lowering the blade into the material.
Guidelines for tool maintenance and the importance of using identical replacement parts.
Procedure for checking and replacing worn motor brushes to maintain efficiency.
Instructions for safely replacing the power switch and reconnecting wiring.
Steps for disconnecting and replacing the power cord, ensuring proper connection.
How to readjust the saw's base to blade angle for accurate cuts.
Details needed, including part number, description, and model number, when ordering replacement parts.
