Sears Craftsman 944.364380

Questions and Answers

S
ssheltonAug 7, 2025
Why is my Sears Craftsman 944.364380 Lawn Mower losing power?
- H
  holly35Aug 7, 2025
  Your Sears Lawn Mower may be losing power due to: * The mower housing or blade dragging in the grass: Raise the cutting height. * Cutting too much grass: Raise the cutting height. * A dirty air filter: Clean or replace the air filter. * Buildup of grass and debris under the mower: Clean the underside of the mower housing. * Too much oil in the engine: Check the oil level. * Walking speed too fast: Cut at a slower walking speed.
P
Patricia JohnsonAug 11, 2025
What to do if my Sears Craftsman 944.364380 Lawn Mower has a poor cut?
- W
  williamrussellAug 11, 2025
  If your Sears Lawn Mower is providing a poor, uneven cut, consider the following: * Worn, bent, or loose blade: Replace the blade and tighten the blade bolt. * Uneven wheel heights: Set all wheels at the same height. * Buildup of grass and debris under the mower: Clean the underside of the mower housing.
L
llongAug 15, 2025
Why Sears Lawn Mower has excessive vibration?
- J
  Jessica RiceAug 15, 2025
  Excessive vibration in your Sears Lawn Mower may be due to: * A worn, bent, or loose blade: Replace the blade and tighten the blade bolt.
M
Melissa WhiteAug 20, 2025
Why is the starter rope hard to pull on my Sears Lawn Mower?
- C
  Cody CastanedaAug 20, 2025
  If the starter rope on your Sears Lawn Mower is hard to pull, it could be due to: * The engine flywheel brake being engaged when the control bar is released: Depress the control bar to the upper handle before pulling the starter rope. * A broken blade adapter: Replace the blade adapter. * Blade dragging in grass: Move the lawn mower to cut grass or to hard surface.
E
Eric GonzalezAug 25, 2025
Why is the grass catcher not filling on my Sears Craftsman 944.364380 Lawn Mower?
- N
  Natasha MartinAug 25, 2025
  If the grass catcher on your Sears Lawn Mower is not filling, check these: * Cutting height too low: Raise the cutting height. * Worn blade: Replace the blade. * Catcher not venting air: Clean the grass catcher.
L
leahbryantAug 28, 2025
Why is my Sears Craftsman 944.364380 hard to push?
- J
  Jordan MendozaAug 28, 2025
  If your Sears Lawn Mower is hard to push, consider these factors: * Grass is too high or wheel height is too low: Raise the cutting height. * Rear of mower housing or blade dragging in grass: Raise rear of mower housing one setting higher. * Grass catcher too full: Empty the grass catcher. * Handle height position not right for you: Adjust handle height to suit.
C
Christian EllisonNov 1, 2025
Why Sears Craftsman 944.364380 does not start?
- M
  mnixonNov 2, 2025
  Your Sears Lawn Mower might not be starting due to several reasons: * A dirty air filter: Clean or replace the air filter. * Lack of fuel: Fill the fuel tank. * Stale or water-contaminated fuel: Empty the fuel tank and refill with fresh, clean gasoline. * Disconnected spark plug wire: Connect the wire to the plug. * Faulty spark plug: Replace the spark plug. * Loose or broken blade adapter: Tighten the blade bolt or replace the blade adapter. * Control bar not engaged: Depress the control bar to the handle. * Defective control bar: Replace the control bar. * Fuel valve lever in the OFF position: Turn the fuel valve lever to the ON position. * Weak battery (if equipped): Charge the battery. * Disconnected battery connector (if equipped): Connect the battery to the eng...

Summary

Warranty

LIMITED TWO YEAR WARRANTY ON CRAFTSMAN POWER MOWER

Details the limited two-year warranty for Craftsman power mowers, covering defects in material or workmanship.

COMMERCIAL OR RENTAL USE

Specifies the warranty terms for commercial or rental use of the power mower, which differ from residential use.

Warranty Exclusions

Lists exclusions from the warranty coverage, such as expendable items and damage from misuse.

SAFETY RULES

I. GENERAL OPERATION

Provides essential safety guidelines for operating the lawn mower, emphasizing user awareness and machine handling.

II. SLOPE OPERATION

Outlines critical safety precautions and best practices for operating the mower on slopes to prevent accidents.

III. CHILDREN

Highlights the dangers posed by children near lawn mowers and provides instructions to ensure their safety.

IV. SAFE HANDLING OF GASOLINE

Offers essential safety advice for handling gasoline, a flammable substance, to prevent fires and explosions.

V. GENERAL SERVICE

PRODUCT SPECIFICATIONS

Lists the technical specifications of the lawn mower, including capacity, oil type, and torque settings.

ASSEMBLY; PRE-OPERATION

Guides users through the initial setup and pre-operation checks required before using the lawn mower.

ASSEMBLY; PRE-OPERATION

HOW TO SET UP YOUR LAWN MOWER

Provides guidance on setting up the lawn mower, including unfolding the handle and assembling components.

TO ASSEMBLE GRASS CATCHER

Details the process for assembling the grass catcher bag and frame for the lawn mower.

TO INSTALL ATTACHMENTS

Explains how to install additional attachments for the lawn mower, such as for bagging or mulching.

OPERATION

KNOW YOUR LAWN MOWER

Introduces the user to the lawn mower's controls and features, recommending familiarization before operation.

MEETS CPSC SAFETY REQUIREMENTS

States that the lawn mower conforms to specific safety standards set by CPSC and ANSI.

ENGINE SPEED

Explains that engine speed is factory-set and not adjustable, advising professional service for speed issues.

ENGINE ZONE CONTROL

Describes the operator presence control bar and the importance of not tampering with the engine control system.

OPERATION

TO ADJUST CUTTING HEIGHT

Instructs users on how to adjust the lawn mower's cutting height by repositioning the wheels.

REAR BAGGING

Details the steps required to attach and use the rear bagging system for the lawn mower.

SIDE DISCHARGING

Explains how to set up the lawn mower for side discharging by installing the discharge deflector.

OPERATION

SIMPLE STEPS TO REMEMBER WHEN CONVERTING YOUR LAWN MOWER

Provides a quick reference guide for converting the mower between mulching, bagging, and side discharging modes.

TO EMPTY GRASS CATCHER

Describes the procedure for safely removing and emptying the grass catcher from the lawn mower.

BEFORE STARTING ENGINE

Covers essential steps to take before starting the engine, including adding oil and fuel.

OPERATION

ADD GASOLINE

Provides instructions on how to safely add gasoline to the lawn mower's fuel tank.

TO START ENGINE

Details the procedure for starting the lawn mower's engine, including priming and using the starter handle.

MOWING TIPS

Offers advice for efficient and effective mowing, including adjusting speed and handling tall grass.

MULCHING MOWING TIPS

Provides specific tips for optimal mulching performance, including blade speed and cutting patterns.

MAINTENANCE

MAINTENANCE SCHEDULE

Presents a comprehensive schedule for routine maintenance tasks based on usage hours and time intervals.

GENERAL RECOMMENDATIONS

Offers general advice for maintaining the lawn mower to ensure longevity and warranty validity.

BEFORE EACH USE

Lists critical checks that must be performed on the lawn mower before each use to ensure safety and proper function.

LUBRICATION

Explains the importance of lubrication and refers to the lubrication chart for specific points.

LUBRICATION CHART

Provides a visual chart detailing lubrication points and recommended lubricants for the lawn mower.

TIRES

BLADE CARE

Covers essential aspects of lawn mower blade maintenance, including removal, replacement, and sharpening.

TO REMOVE BLADE

Provides detailed instructions on how to safely remove the lawn mower blade for maintenance or replacement.

TO REPLACE BLADE

Outlines the procedure for correctly installing a new or sharpened lawn mower blade.

TO SHARPEN BLADE

Guides users on the process of sharpening the lawn mower blade while emphasizing balance.

GRASS CATCHER

Offers advice on maintaining and checking the grass catcher for wear and damage.

ENGINE LUBRICATION

Explains the correct type of oil and viscosity grade to use for engine lubrication based on temperature.

MAINTENANCE

TO CLEAN AIR FILTER

Details the steps for cleaning or replacing the air filter cartridge to ensure optimal engine performance.

MUFFLER

Advises on inspecting the muffler for corrosion and the potential hazards it may present.

SPARK PLUG

Specifies when to replace the spark plug and where to find its type and gap settings.

CLEANING

Provides instructions for cleaning the lawn mower, including the underside and engine area, after use.

SERVICE AND ADJUSTMENTS

TO ADJUST CUTTING HEIGHT

Directs users to the operation section for instructions on adjusting the cutting height.

REAR DEFLECTOR

Describes the function of the rear deflector and the need for replacement if damaged.

TO ADJUST HANDLE

Explains how to adjust the lawn mower handle to one of three height positions for user comfort.

ENGINE SPEED ADJUSTMENTS

Reaffirms that engine speed is factory-set and advises seeking professional service for any issues.

CARBURETOR

States that the carburetor is not adjustable and recommends professional service for any suspected problems.

STORAGE

LAWN MOWER

Provides instructions for preparing the lawn mower for storage, including cleaning and lubrication.

HANDLE

Details how to fold the lawn mower handle for convenient storage, with important notes on cable protection.

ENGINE FUEL SYSTEM

Emphasizes the importance of preparing the fuel system for storage to prevent gum deposits and damage from fuel separation.

STORAGE

ENGINE OIL

Advises draining and replacing engine oil with clean oil as part of the storage preparation.

CYLINDER

Describes the process of adding oil to the cylinder before storing the engine to prevent rust.

OTHER

Covers additional storage tips, including gasoline storage, unit covering, and avoiding storing warm units indoors.

TROUBLESHOOTING

Does not start

Lists common causes and their corresponding corrections for the issue of the lawn mower not starting.

TROUBLESHOOTING

Loss of power

Identifies reasons for loss of power and provides solutions such as adjusting cutting height or cleaning the air filter.

Poor cut - uneven

Addresses issues causing an uneven cut, like worn blades or uneven wheel heights, and their fixes.

Excessive vibration

Explains potential causes of excessive vibration and recommends checking blades or contacting service.

Starter rope hard to pull

Offers solutions for a stiff starter rope, such as ensuring the control bar is released or checking the blade adapter.

Grass catcher not filling (If so equipped)

Provides reasons why the grass catcher might not fill properly, like incorrect cutting height or a clogged catcher.

Hard to push

Lists factors contributing to difficulty pushing the mower and suggests adjustments to cutting height or handle position.

REPAIR PARTS