Before raising make shure all the hallyards and shrouds are set correctly and that they are not
tangled or caught under the trailer. Operation can be done by single person if you use support
instead of the person standing in the back of the boat. It is much easier to do it by two people.
Remove the pin from the mast step and tape the swiveling cleats for hallyards to prevent them
catching between the mast and the coachroof when raising the mast:
Then you remove the mast from its support and move it towards the back of the boat:
The person at the back uses his shoulder or hands to support the weight of the mast and the
person at the mast step alignes the mast with the mast foot. In order to help aligning the holes
the person supporting the mast gently moves the mast few centimeters left and right. Then you
insert the bolt into the mast step and secure it with the safety pin: