2.3.2. Jib parts:
From left to right and top to bottom: Jib furler with 2 shackles, adjustement ladder and spring
pin, top jib furler, trapeze block for jib cunningham with 2mm dyneema, jib cunningham line, jib
hallyard, jib furling line, two 30mm blocks for jib sheet, composite shackle, jib sheet.
2.3.3. Spinnaker parts:
From left to right and top to bottom: Composite shackle, 4x 40 mm sheet blocks (2 ratchet,
2 normal), sheet, retriver line block (20mm), gennaker hallyard/retriever, gennaker bag aft
attachment line, gennaker bag forward attachment line, gennaker bag.
To Next Page
Loading...
