2.7 Footstraps
Fix the central part of the footstrap with the dyneema line. Note that footstrap is not symetrical
- measuring from the middle to the end one part is longer than the other so make sure footstrap
is oriented corectly before you x the center. Use carbon tube to raise the point to allow easier
hooking with your feet.
Fix end parts withth dyneema as well. Be particulary carefull with this knots since you can loose
someone overboard if the knot gets loose while hiking. You can use bungee rope wherever you
think will help you.
This is one of the options how the footstraps can look like when nished.
To Next Page
Loading...
