Need help?Do you have a question about the SeaSTAR PA1200-2 and is the answer not in the manual?
General| Application | Marine Communication |
|---|---|
| Interface | NMEA 0183 |
| Type | VHF Radio |
| Power Output | 25 W |
| DSC Capability | Yes |
Perform essential pre-operation checks and safety procedures for the steering system.
Details on system compatibility, required tools, and technical specifications for installation.
Explains the operational principles of the hydraulic power assist steering system.
Covers crucial information and warnings prior to commencing the installation process.
Outlines essential preparation steps and considerations before beginning the installation.
Provides a comprehensive step-by-step overview of the complete system installation.
Details for installing outboard front mount and I/O cylinders.
Instructions for side mount and splashwell mount cylinder installations.
Installation procedures for inboard and sterndrive cylinders.
Specifics on connecting the autopilot system to the steering.
Guidelines for proper electrical connections for the power assist unit.
Procedure for filling and purging the system using the power purge unit.
Step-by-step guide for manual filling and purging the hydraulic system.
Final check of oil level and system integrity after installation.
Addresses issues where the P/A unit fails to power up or respond.
Resolves problems with the steering system turning the wrong way.
Solutions for bumpy, stiff, or one-way steering issues.
Troubleshooting lack of power assist and indicator light patterns.
Explains unit heat and variations in steering turns with/without assist.
Addresses radio or electronic interference caused by the power assist.
Kit for connecting P/A unit ignition wire to multiple engines.
Tool for quickly bleeding hydraulic steering systems.
Provides dimensions for floor mounting the power assist unit.
Provides dimensions for wall mounting the power assist unit.
To Next Page
