• Seat depth adjustment: To adjust the
seat depth on the MONACO™ and
MONACO ASSIST™ loosen the two wing
knobs (fig.4 & 5) positioned under the
seat of the chair, move the seat to the
desired position and tighten the wing
knobs again.
Please note: Do not attempt to adjust
the seat depth while the client is in the
chair.
• Seat height adjustment: This adjustment is a factory setting. Please contact your
Seating Matters provider for further adjustment.
• Chair Movement: To move the MONACO™and MONACO ASSIST™ around, ensure the
brakes are disengaged and push using the push handle on the back. Only a competent
person should move this chair. Engage the directional lock castor on the front left of
the chair to control the direction of movement and for ease of manoeuvrability.
(fig.4)
(fig.5)
Seat Depth
Adjustment
To Next Page
Loading...