EasyManua.ls Logo

Seaward Test 'n' Tag - User Manual

Seaward Test 'n' Tag
32 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Test n' Tag
Label Printing System
Instruction Manual
Bracken Hill, South West Industrial Estate, Peterlee, Co.
Durham SR8 2SW. England.
Tel: +44 (0)191-586 3511 Fax: +44 (0)191-586 0227
www.seaward.co.uk
sales @ seaward.co.uk
calibration @ seaward.co.uk

Questions and Answers

  • K
    Katherine HoltAug 18, 2025
    What to do if Seaward Test 'n' Tag displays ‘No Printer Connected’ error?
    • Z
      Zachary RobertsonAug 19, 2025
      If the Seaward Label Maker displays a ‘No Printer Connected’ error, first ensure that the printer is switched on. Then, check that the cartridge is correctly inserted and locked in place. Finally, verify that the interface cable from the tester to the printer is properly connected and reseat the cable to ensure a secure connection.
  • A
    Ann JacobsonAug 21, 2025
    What does it mean if my Seaward Test 'n' Tag has a flashing red light?
    • J
      Joshua SmithAug 21, 2025
      If your Seaward Label Maker has a flashing red light, try placing or reseating the cartridge in the printer and locking it in position. Then, switch the printer off and back on to reset the flashing red light. If the fault persists, contact Seaward Technical Support.
  • A
    Alexis HancockAug 23, 2025
    What does it mean if my Seaward Test 'n' Tag Label Maker displays ‘Printer contains Incompatible Media’?
    • D
      Dawn MatthewsAug 23, 2025
      If the Seaward Label Maker displays ‘Printer contains Incompatible Media’, it means the print cartridge type is incorrect. Insert the correct cartridge type and retry. If the fault persists, contact Seaward Technical Support.
  • M
    Margaret ArnoldAug 26, 2025
    What to do if Seaward Label Maker labels are not being printed correctly?
    • S
      Steven ReillyAug 26, 2025
      If labels are not being printed correctly on the Seaward Label Maker, ensure that the cartridge has been tensioned correctly before being put into the printer. Also, make sure the cartridge has been put into the printer correctly and locked in. Try another cartridge that has been tensioned correctly. If the fault persists, contact Seaward Technical Support.
  • G
    Gina CollinsAug 28, 2025
    What to do if Seaward Test 'n' Tag Label Maker displays ‘No Paper in Printer’ error?
    • W
      Wendy RobertsAug 28, 2025
      If the Seaward Label Maker displays a ‘No Paper in Printer’ error, it likely means the printer ran out of labels. Replace the cartridge. If the fault persists, contact Seaward Technical Support.
  • C
    Cindy RuizAug 30, 2025
    What to do if Seaward Test 'n' Tag Label Maker displays ‘Print Media Jam’ error?
    • S
      Shane PottsAug 30, 2025
      If the Seaward Label Maker displays a ‘Print Media Jam’ error, it indicates a label jam. Replace the cartridge. If the fault persists, contact Seaward Technical Support.
  • R
    Robert NunezSep 1, 2025
    How to fix Seaward Test 'n' Tag 'Generic Printer Error'?
    • M
      Mrs. Carrie RodriguezSep 1, 2025
      If the Seaward Label Maker displays a ‘Generic Printer Error’, power off and then power on the printer. Allow the paper to feed and cut off the label. Then, retry. If the fault persists, contact Seaward Technical Support.
  • B
    Benjamin BarnesSep 3, 2025
    How to fix Seaward Test 'n' Tag Label Maker print with lines running across?
    • A
      Ann BryantSep 4, 2025
      To fix a Seaward Label Maker print that has lines running across it, remove the cartridge and gently wipe the head with alcohol wipes or a clean cloth. Re-install the cartridge. If the issue continues, try another cartridge, ensuring it is tensioned prior to installation. If the fault persists, contact Seaward Technical Support.
  • B
    Brooke RiveraSep 6, 2025
    Why is there no green power on indicator on my Seaward Label Maker?
    • J
      james19Sep 6, 2025
      If there is no green power on indicator on your Seaward Label Maker, check that the power supply is plugged into the outlet socket and the socket is switched on. Also, check that the power supply is connected to the printer and reseat the incoming power lead. Ensure the printer is switched on. If possible, try another power supply to confirm if the original power supply is faulty. If the fault persists, contact Seaward Technical Support.
  • M
    Mr. Edward Guzman Jr.Sep 8, 2025
    What does it mean if my Seaward Test 'n' Tag Label Maker displays ‘Incorrect Printer Type Connected’?
    • J
      John KaneSep 8, 2025
      This message on the Seaward Label Maker indicates that you are not using a Seaward K3000PC or K3110PC Printer. Contact Seaward Technical Support.

Summary

Limited Warranty & Limitation of Liability

Disposal of Old Product

Before Starting

1. Introduction

2. Installing the Supply Cartridge

3. Printing a Test Label

4. Printing Labels (PrimeTest; Rigel)

Bluetooth Favourites

Pairing the Bluetooth adapter with the tester and adding the printer to the favorites list.

Printing labels

Initiating label printing from the ViewData screen or at the end of a test.

Load TestnTag Logo

Transferring a bitmap logo to the PrimeTest for use with the print system.

5. Printing Labels (Supernova; Europa)

Re-Test Period

Defining the re-test period for labels when creating new appliances or starting new tests.

Download to Transfer Printer

Selecting download options to print labels from the DOWNLOAD RESULTS menu.

Automatic Printing of Labels

Configuring the tester to print a label automatically at the end of each test.

Changing the label title

Adding a logo to the label

Test `N Tag Logo

Transfer

6. Trouble Shooting

7. Parts List

Seaward Test 'n' Tag Specifications

General IconGeneral
BrandSeaward
ModelTest 'n' Tag
CategoryLabel Maker
LanguageEnglish

Related product manuals