EasyManua.ls Logo

Seca 804 - Changing the Batteries; Technical Data

Seca 804
11 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Model 804 17
GB
8. Servicing
Changing the batteries
When or bAtt appear in the display, you should change the batteries. You re-
quire 4 AAA-type 1.5 V batteries.
Carefully turn over the scale so that the
base of the scale is accessible (see
Fig. 3).
Push the battery compartment closure
towards “Battery” and open the cover.
Remove exhausted batteries and insert
new batteries in the battery compart-
ment.
Check that the polarity is correct.
Close the cover.
Then turn the scale back up the right
way.
9. Technical data
Dimensions
width: 315 mm
height: 44 mm
depth: 300 mm
Height of figures 20 mm
Weight approx. 1.3 kg
Temperature range +10 °C to +40 °C
Maximum load 150 kg / 330.6 lb / 23:8 st
Minimum load 2 kg / 4.4 lb
Graduations
0 up to 150 kg 100 g
up to 330.6 lb 0.2 lb
Measurement ranges
Body fat 4.0 to 80.0 % in 0.1 % increments
Body water 4.0 to 80.0 % in 0.1 % increments
Height 100 to 220 cm in 1 cm increments
39.5 inches to 86.5 inches in 0.5 inch increments
Power supply Battery
Batteries 4 type AAA 1.5 V batteries
Weighing precision greater than ±0,6 %

Related product manuals