14
4. Before you start…
Unpacking
The scope of supply includes:
• Chair scale comes complete assem-
bled
• Battery holder containing
6 mignon-type AA 1.5 V batteries
• 1 set of operating instructions
Power supply
The scale is powered exclusively by batteries.
– Open the battery compartment in the
base of the display housing.
– Connect the cable to the holder and
batteries.
– Place the holder in the battery compart-
ment.
– Close the lid of the battery compart-
ment again.
The LC display has a low power consumption – 4000 weighing operations can be
performed with one set of batteries.
Once battery voltage is no longer adequate, the battery symbol first appears in
the display to indicate that battery power is dropping.
Once battery power is no longer sufficient,
bAtt appears in the display and weighing is
no longer possible.
To Next Page
Loading...