Model 952 19
this measure is equally unsuccessful, inform the Service department.
8. Servicing
Your seca scale leaves the factory with an accuracy greater than ±0,1 %/±100 g. To en-
sure that this accuracy is maintained, the product must be carefully set up and regularly
maintained. Depending on the frequency of use, we recommend servicing every 3 to 5
years. Please ensure that a qualified service agent is used. If in doubt, contact seca Cus-
tomer Service for further information.
9. Technical data
Maximum load 200 kg / 440 lbs / 32 sts
Minimum load 1 kg
Graduations 100 g / 0.2 lbs
Dimensions
height: 920 mm
width: 565 mm
depth: 810 mm
Height of figures 20 mm
Weight approx. 24.5 kg
Temperature range +10 °C to +40 °C
Power supply batteries
Batteries 6 type AA 1.5 V batteries
Power consumption approx. 25 mA
EN 60 601-1:
medical electrical equipment type B:
Accuracy greater than ±0,1 %/±100 g
Functions Switch between units, NET, Auto-hold
10. Disposal
Disposing of the device
Do not dispose of the device in
domestic waste. The device must
be disposed of properly as elec-
tronic waste. Follow the national regula-
tions which apply in your case. For further
information, contact our service depart-
ment at: service@seca.com
Batteries
Do not throw used batteries away in do-
mestic waste. Dispose of batteries at col-
lection points in the vicinity. When buying
new batteries, select those low in harmful
substances and containing no mercury
(Hg), cadmium (Cd) or lead (Pb).
To Next Page
Loading...