SECO-LARM E-931CS22RRCQ User Manual

E-931CS22RRCQ
Range: 22ft. (7m)
Retro-Reflective Photoelectric
Sensor Entry Alert System
Sensor
Caution:
ENFORCER
®
INSTALLATION MANUAL
Features:
•
•
Retro-reflective photoelectric sensor.
••
•
•
Range: Up to 22 feet (7m).
•
•
Perfect for monitoring an entrance, or for counting
foot traffic with optional counter.
•
•
Will make “ding-dong” sound or siren sound when
the beam is interrupted.
•
•
Speaker volume can be adjusted or turned off.
•
•
When in siren mode, sounding time is adjustable
from 3 to 30 seconds.
•
•
9VDC adapter included.
•
This sensor was not designed to prevent bodily injury or loss of life.
• Use of this sensor in certain security applications may be regulated by local laws or codes.
SECO-LARM is not responsible for compliance with such laws or codes.
•
All components plug into each other.
No hard wiring required.
•
Optional counter available (E-931ACC-CQ).
•
•
Optional second speaker available (E-931ACC-SQ).
•
Includes the following:
— Retro-reflective photoelectric sensor.
— Reflector.
— Speaker/electronic chime.
— 9VDC adapter.
Included:
E-931ACC-R1Q
Reflector
E-931CS22SQ
Transmitter/Receiver
E-931ACC-SQ
Speaker/Electronic Chime
ENFORCER
ENFORCER
E-931ACC-BLS4Q
E-931ACC-BLR1Q
Adapter
Note: Model numbers that ends with "Q" represents RoHS compliant products.

SECO-LARM E-931CS22RRCQ Specifications

General

Temperature Range	-20°C to 50°C (-4°F to 122°F)
Tamper Switch	Yes
Detection Angle	90°
IP Rating	IP54
Power Supply	12V DC
Relay Output	N/C
Housing Material	Plastic
LED Indicators	Yes
Relay Contact Rating	1A at 30V DC

Summary

Product Features and Included Components

Important Cautions and Disclaimers

Optional Accessories and Sample Installations

Wiring Diagrams

Mounting Instructions

Mounting the Reflector

Guidance on how to mount the reflector component securely.

Mounting the Speaker/Electronic Chime

Instructions for attaching the speaker or chime unit.

Mounting the Sensor

Steps for installing the main sensor unit.

Installation and Adjustment Procedures

LED Functions

Explanation of the RED LED indicator for sensor status and alignment.

System Installation Steps

Step-by-step guide for connecting and positioning system components.

Setting the Speaker Mode

Instructions for selecting the sound output mode (Chime, Alarm, or Off).

Using the Optional Counter

Guidance on operating the optional digital counter.

System Testing

Procedures to verify system functionality after setup.

Specifications and Troubleshooting

Product Specifications

Technical details including model, range, voltage, and environmental limits.

Troubleshooting Guide

Common issues like sensor detection failure and LED not turning on.

Product Dimensions

Detailed measurements of the sensor and speaker components.

Important Notices and Warranty Information