Indoor Access
Control Keypad
SK-1011-SDQ
Installation Manual
The ENFORCER SK-1011-SDQ is a single-output, indoor access control keypad that doesn't
scrimp on the important features. It supports up to 1,000 users and 50 temporary visitors and can
be surface mounted with the included back box or flush mounted in a standard single-gang back
box. It includes a tamper alarm, and a backlit keypad for ease of use at night or in dark areas.
12~24 VDC/VAC Auto-adjusting operation
Up to 1,000 possible user codes (000~999)
Up to 50 (01~50) possible temporary visitor codes, which can be programmed for one-time or
limited-time use (1~99 hours)
Form C relay, 1A@30VDC max. can be programmed to activate for up to 99,999 seconds
(nearly 28 hours)
Tamper output N.C. Dry contact, 50mA@24VDC max.
Mounts to a standard single-gang back box (surface-mount back box included)
All features are programmed directly from the keypad with no need for an external programmer
EEPROM Memory protects programmed information in case of power loss
Egress input lets users exit the premises without keying in the code
Data I/O terminal for split-series setup providing added security
Expansion port for future optional features
Always-on backlit keypad
To Next Page
Need help?
General
