Need help?Do you have a question about the SECO-LARM SK-1011-SDQ and is the answer not in the manual?
General| Brand | SECO-LARM |
|---|---|
| Model | SK-1011-SDQ |
| Category | IP Access Controllers |
| Language | English |
Critical safety warnings, especially regarding placement relative to mechanical doors to prevent injury.
Explains the procedure to access and leave the keypad's programming interface.
Instructions for changing the master code used to enter programming mode.
Demonstrates functions like toggling output, managing auto-disable, and enabling/disabling output.
The structure for adding, deleting, or listing user codes with specific User IDs.
How to program a specific user code for a given User ID to activate the output.
Details on User IDs and code length requirements, especially for auto entry mode.
Configuring the output to operate in toggle (start/stop) or timed mode.
Programming the length of time the output remains active, from 1 to 99,999 seconds.
How to set the 24-hour clock for accurate timing of features like auto-disable.
Defining a daily period when the output will be automatically disabled.
Using 24-hour format to specify the start and end times for the auto-disable period.
Setting the number of incorrect attempts before the keypad locks and for how long.
Configures keypad for automatic code entry without '#' key, matching master code length.
Sets keypad to require '#' after code entry, allowing variable code lengths.
Procedure to enter programming mode when the master code is forgotten.
To Next Page
