To Next PageTo Next Page
Need help?Do you have a question about the Seculink NVR1116PF and is the answer not in the manual?
Instructions for installing a SATA HDD into the HD NVR.
Steps for logging into the NVR system with default credentials.
Procedure to format the hard disk drive before use.
Steps to search and play back recorded video footage.
Configure email alerts for NVR events.
How to log in to the XMeye app locally.
Steps to add a device to the XMeye app.
Downloading and installing the CMS software for remote monitoring.
Login procedure for the CMS software.
Adding the NVR to the CMS software for computer monitoring.
Manage connected cameras, including search and addition.
Configure motion detection sensitivity, region, and linkage.
General| Model | NVR1116PF |
|---|---|
| Type | Network Video Recorder |
| Channel Support | 16 channels |
| Hard Drive Capacity | Up to 10TB |
| Hard Drive Interface | SATA |
| USB Interface | 2 USB 2.0 |
| Operating System | Embedded Linux |
| Video Output | 1 HDMI, 1 VGA |
| Audio Output | 1 channel |
| Video Compression | H.264 |
| Network Interface | 1 RJ45 10/100Mbps |
| Power Supply | DC 12V |
| PoE Ports | 16 PoE ports |
| Operating Temperature | -10°C to +55°C |
| Operating Humidity | 10% to 90% RH |
| Video Input | 16 x IP camera inputs |
