To Next PageTo Next Page
Need help?Do you have a question about the Seculink NVR1616PF and is the answer not in the manual?
Step-by-step guide for installing a SATA hard disk drive into the NVR unit.
Instructions for connecting both wired and WiFi IP cameras to the NVR.
Detailed explanation of the NVR's physical interface ports and their functions.
Overview of NVR main menu options, including recording, alarm, and system settings.
Guide to logging into the NVR, shutting down, and rebooting the system.
Procedure for formatting the hard disk drive for optimal NVR performance.
How to set recording modes and access recorded video footage.
Steps to connect the NVR to a network and configure IP settings.
Configuring email notifications and mobile app access for remote monitoring.
Instructions for using PC software to remotely access and view NVR feeds.
Understanding and configuring channel types, status, and resolutions for connected cameras.
Process for discovering and adding cameras to the NVR system.
Setting up motion detection parameters, sensitivity, and alarm linkages.
Configuring alerts for video blind conditions and signal loss from cameras.
Solutions to common problems encountered during NVR operation and setup.
Information regarding product warranty coverage, claims, and exclusions.
General| Model | NVR1616PF |
|---|---|
| Channel Input | 16 |
| Video Compression | H.264 |
| Max Resolution | 1080p |
| Storage Capacity | Up to 6TB |
| HDD Capacity | Up to 6TB |
| Audio Output | 1 channel |
| USB Interface | 2 x USB 2.0 |
| Operating System | Embedded Linux |
| Recording Resolution | 1080p |
| Hard Drive Support | 1 SATA interface |
| Network Interface | 1 x RJ45 10/100/1000Mbps |
| Video Output | HDMI, VGA |
| Audio Input | 1 channel |
| Power Supply | 12V DC |
| Operating Temperature | -10°C to +55°C |
