Seculink NVR1608PF - User Manual

To Next Page

SECULINK HD NVR Operation Instruction

Please read the instruction carefully before using, and keep it properly

Fit Models:

NVR1104PF, NVR1108PF, NVR1116PF,

NVR1604PF, NVR1608PF, NVR1616PF,

NVR5116PF, NVR5132PF,

......

Need Help? Visit us online for up-to-date software and complete instruction manuals.

SECULINK TECHNOLOGY (HK) LIMITED

SHENZHEN SECULINK TECHNOLOGY CO., LTD

Website: www.seculink.net

E-mail: info@seculink.net

Information in this document is subject to change without prior notice. As our products are

subject to continuous improvement, SECULINK and our subsidiaries reserve the right to

modify product design and specifications, without notice and without incurring any

obligation.

Need help?

Do you have a question about the Seculink NVR1608PF and is the answer not in the manual?

Summary

Step-by-step instructions for installing a SATA hard disk drive within the NVR unit.

Guide on formatting HDDs and troubleshooting recognition issues.

Steps to install the mobile app, add devices, and view them remotely.

Guide to installing and logging into the CMS software for remote computer access.

Adding NVR devices to CMS and viewing their live channels on a computer.

Solutions for NVR boot failures, HDD issues, and video/audio output problems.

General

Model	NVR1608PF
Video Input	16 Channels
Audio Output	1 Channel
Recording Resolution	Up to 8MP
Video Compression	H.265+/H.265/H.264+/H.264
Operating Humidity	10% to 90% (non-condensing)
Video Output	HDMI, VGA
Network Interface	1 x 10/100/1000 Mbps
USB Interface	2 USB 2.0 ports
Operating Temperature	-10°C to 55°C
Audio Input	1 Channel
Storage Capacity	Supports up to 10TB HDD (not included)
Hard Drive Support	2 SATA interfaces
PoE Ports	8 PoE ports (IEEE 802.3af/at)