Page 14
Line items 1 and 2 will auto-populate with default values (these are the
most common peak and off-peak time periods):
1 7am 11pm 30.000 c/kWh
2 11pm 7am 18.000 c/kWh
Line item 1 is the peak rate. Press the 7am button to change the start
time, if required. Press the 30.000 button to change the peak rate.
Enter the rate (c/kWh) for your peak tariff using the numerical keypad.
Line item 2 is the off-peak rate. Press the 11pm button to change the
start time, if required. Press the 18.000 button to change the off-peak
rate. Enter the rate (c/kWh) for your off-peak tariff using the numerical
keypad.
Press the OK button and you will then see the Weekend tariff screen.
Adjust the time and tariff rate as required.
Press the OK button to finish. You will be prompted for a PIN code.
PIN code entry
Making any changes to advanced settings will require you to enter a PIN
code as shown here:
The above PIN code entry screen will appear automatically when you
attempt to change any of the advanced settings.
PIN code
To Next Page
Loading...
Need help?
General