Need help?Do you have a question about the Secure Pipit 500 and is the answer not in the manual?
General| Viewing Angle | 178° (H) / 178° (V) |
|---|---|
| Video Input | HDMI, VGA |
| Refresh Rate | 60 Hz |
| Panel Type | IPS |
| VESA Mount | 100 x 100 mm |
| Resolution | 1920 x 1080 pixels |
| Contrast Ratio | 1000:1 |
| Power Consumption | 30W |
| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
| Response Time | 5ms |
| Ports | HDMI, VGA, Audio Out |
Document intended for users of the Pipit 500 in-home display unit, part of Secure Meters AMI system.
Manual describes Pipit 500 functions, features, and provides information on commissioning and usage.
Lists contents of the Pipit 500 pack: display unit, power adapter, guides, bracket, screws, and batteries.
Provides guidance on handling the unit to avoid damage, including display care and protection from liquids.
Describes Pipit 500 as an IHD unit with a touch-sensitive LCD, ZigBee module for meter communication, and its display capabilities.
Explains Pipit 500 connection to mains power, wireless pairing with Smart Meter via HAN, and its communication process.
Details the touch-sensitive LCD screen, status bar, main display area, and backlight configuration.
Explains data displayed on LCD: consumption, generation, cost, CO2 emissions, and connection status.
Describes the two LEDs on the unit: tri-colour electricity LED and message notification LED.
Explains the battery switch for operation without mains power and the low battery indicator.
Instructions on using the correct provided adapter to power the Pipit 500 unit safely and effectively.
Details the pre-requisite and process for wirelessly pairing the Pipit 500 with a Smart Meter using the HAN.
Provides dimensions and step-by-step instructions for securely mounting the Pipit 500 unit on a wall.
Describes the touch-sensitive display, status bar elements, main display area, and significance of identifiers.
Explains the splash screen displayed on power up, showing supplier logo, MAC address, and installation code.
Details the Home screen displaying net energy usage, power indicator dial, and sticky screen elements.
Describes accessing the main menu via the Menu button to navigate to Home, History, Messages, Settings, and Info.
Explains how Pipit stores and displays messages from the supplier, including message categories and alerts.
Explains how Pipit displays historical data graphically and in tabular form, allowing comparisons.
Explains how to access the Settings menu to configure default parameters like targets, alarms, and display options.
Describes the Info screen showing supplier URL, signal strength, application version, and radio firmware version.
To Next Page
