1 Introduction
1.1 Target audience
This document is intended for users of the Pipit 500 in-home display unit, which is a component of the Secure
Meters AMI (advanced metering infrastructure) system.
1.2 About this user manual
The manual describes functions and features of Pipit 500 and provides information on how to commission and
use the device.
1.3 What’s inside the box?
Inside your Pipit 500 pack you will find:
● Pipit 500 (in-home display unit)
● Mains power adaptor
● Quick Start Guide
● Wall-mount bracket
● 2 x wall mount screws
● 2 x AAA alkaline batteries
1.4 Care instructions
● To avoid damage, do not use sharp objects on the display.
● Do not immerse the unit in water or any other liquid. Keep it away from heat-generating sources or
areas with high moisture.
● Excessive impact or shock may damage the unit. If the display is damaged avoid touching the liquid
crystals contained in it.
Important Note:
● Before fitting batteries remove the unit from power.
● Only use the adapter provided with your display to power it.
● The display will only work with ZigBee SEP 1.x smart meter. If you remove it from your home it will
stop working. You should re-pair your Pipit 500 with new smart meter if you are changing address.
To Next Page
Loading...
