Secutron MR-2100

MR-2100/2200 Operator’s Manual
11
1. These zones do not restore.
2. Privilege Level 0 generates a restore signal; all others generate a trouble signal.
3. This zone does not restore and is not repeated sequentially in the archive.
SSS Sub-Zone Number
Addressable Circuit: Device Number
Comlink 1 (Zone 51): Unit Network ID number
Comlink 3 (Zone 53): Unit ID number
Note: Only MR-2614 Annunciators use IDs other than 000.
Comlink 6 (Zone 54): 000 to 008 - MR-2614
009 to 016 - MR-2644
239 - MR-2801
240 - MRDL
Output Supervision (Zone 60): Output Circuit Number
Program Re-start (Zone 69): 000 - Power On/Hard reboot
001 - Watchdog
002 - Clock Monitor
003 - Illegal Instruction
004 - Unused Interrupt
005 - Orphan Interrupt
Privilege Level (Zone 80): Level Set
Switch (Zone 83): Switch Number
Hot Key Activation (Zone 90): Function Number of the Hot key pressed
Network Reboot (Zone 92): Unit ID of panel broadcasting the command
Network Reboot Required who (Zone 94): Unit ID of panel generating the Network Reboot
Required trouble
Network Reboot Required why (Zone 95): Reason the panel generated the Network
Reboot Required
001 -- network
002 -- network
003 -- port 3
006 -- negative counter
008 -- memory overflow
All Others: Always 000