4
to lock setting, device name edit, PIN setting and device basic information. To view the
FCC info, go to Device Setting > About > Regulation
● Bluetooth (for V20/W20 only)
You need to turn on the Bluetooth function to connect to a Bluetooth-ready host
such as a laptop PC or mobile phone. A random one-time password (OTP) will
appear as soon as the host attempts to pair with the device. Please enter this OTP
number on the host accordingly.
Note:
■ When the Bluetooth function is turned on, the main menu is locked until the
Bluetooth function is turned off.
■ The Bluetooth function will be automatically turned off if there is no pairing
action within 5 minutes.
● Hidden Wallet Setting
The SecuX Hardware Wallet allows you to create a hidden wallet for plausible
deniability, enhancing your safety and privacy.
Follow the steps below to create your hidden wallet.
Step 1: Set a PIN (4-8 digits); it must be different from the device PIN
Step 2: Re-enter the PIN you set
Step 3: Set a pass-phrase (up to 99 characters)
● Device Reset Setting
All the preference settings including PIN, device name and the private key will be wiped
when you confirm to reset the device to the factory settings. Before performing this
operation, make sure you have access to the 24 recovery words you wrote down during
device initialization so that you can restore your crypto assets on the device or other
compatible crypto wallets in the future.
● Idle Time to Lock
For increased security, the device will automatically log out when the device is idle
over the set idle time. You will be asked to enter your PIN to log in to your device
again.
● Device Name Edit
You can view the current device name and edit it (1-13 capital or small English letter)
if you like.
To Next Page
Loading...