Sedus quarterback - Strength of the Backrest Pressure; Adjusting Backrest Pressure; Depth of the Seat; Adjust Seat Depth

3
E Strength of the backrest pressure
®
1. Adjusting the backrest dynamically 2. Exert only slight pressure
on the seat and backrest
3. Crank the quick adjustment mechanism
downwards until the desired position is achieved (greater backrest
pressure) or upwards (lesser backrest pressure)
F Depth of the seat (optional)
®
1. Press the finger plate and hold it fast 2. Push the cushion to the
desired position
3. Release the finger plate, and the seat will engage
H Adjusting the basic armrests (optional)
® Height:
1. Press the button underneath the armrest, lift or lower
the armrest
2. Release the button, the armrest locks into place
® Adjustable seat width:
1. Loosen the screws slightly with a Torx
key (TX40)
2. Position the armrests 3. Retighten the screws
G Seat angle (optional)
®
1. Stand up 2. Swivel the lever backwards and lock into place
(chair tilts 4° forwards) or swivel downwards and lock into place
(seat moves back into its original position)