Sedus talk about - Tables with folding individual legs; Assembly; Dismantling

Assembly
1
.
Place the table upside down on
the floor, ensuring that the table
top is not scratched on the floor
in the process (A)
2. Release one table leg from
the lock by pushing towards
the joint (B)
3. Fold up the table leg (C)
4. Push the table leg into the
corner element and keep it
pressed down whilst screwing
tight in a clockwise direction (D)
5. Repeat these steps to assemble
the remaining legs
6. Turn the table upright and check
that it is stable
7. The height-adjustable glides
can be used to compensate for
uneven flooring
Dismantling
1. Place the table upside down on
the floor, ensuring that the table
top is not scratched on the floor
in the process
2. Unscrew the table leg in an
anticlockwise direction until
the spring force of the joint is
released (A/B)
3. Fold down the table leg* (C)
4. Push the leg towards the joint
and lock it into place (D)
5. Repeat these steps to fold up
the remaining table legs
* The glides of tables with an edge
length of 700 mm should be com-
pletely screwed in otherwise the
leg cannot be locked into place.
AB
C
AB
CD
2. Tables with folding individual legs
D
11