1. Tables with removable
individual legs
2. Tables with folding
individual legs
3. Tables with folding T-leg
4. Linking individual tables
(fast link system)
5. Inserting interconnecting
tops
6. Stacking tables and inter-
connecting tops
7. Assembling circular tables
8. Accessories
9. Instructions for care
Read these instructions
carefully prior to assembly,
and follow the points listed
exactly.
Preparation
All assembly stages can be com-
pleted by hand without the need
for tools.
Exception: An Allen key (size 8)
is required when assembling the
circular tables.
Assembly
1
.
Place the table upside down on
the floor, ensuring that the table
top is not scratched on the floor
in the process
2. Position one table leg vertically
with the screw on the corner
threaded hole
3. Screw in the leg in a clockwise
direction as far as possible,
make sure it is fitted tightly
4. Repeat these steps to assemble
the remaining legs
5. Turn the table upright and check
that it is stable
6. The height-adjustable glides
can be used to compensate for
uneven flooring
Dismantling
1. Place the table upside down on
the floor, ensuring that the table
top is not scratched on the floor
in the process
2. Unscrew the table legs in an
anticlockwise direction
1. Tables with removable individual legsContents
English
To Next Page
Loading...
