Need help?Do you have a question about the seeed studio SENSECAP T1000-A and is the answer not in the manual?
Details the technical specifications of the tracker, including dimensions, weight, and sensors.
Explains different SenseCAP T1000 models and their positioning architectures.
Describes methods for obtaining location data using GNSS, Wi-Fi, and Bluetooth.
Outlines the primary operational modes and sensor capabilities of the tracker.
Guides on downloading and installing the SenseCAP Mate application.
Provides steps for adding a device and initial configuration via the SenseCAP server.
Details how to configure various tracker parameters using the mobile app.
How to view device status and location data directly on the SenseCAP Mate App.
Accessing and managing device data through the SenseCAP cloud portal.
Links to GitHub repositories for payload decoding scripts.
Explains the structure and parsing of data packets sent by the tracker.
Details the format and fields of the device status packet in Event Mode.
Details the format and fields of the device status packet in Periodic Mode.
Explains the structure of the heartbeat packet containing battery information.
Format of packets containing GNSS location, sensor data, and battery status.
Format of packets containing Wi-Fi location, sensor data, and battery status.
Format of packets containing Bluetooth location, sensor data, and battery status.
Format of packets containing only GNSS location data.
Format of packets containing only Wi-Fi location data.
Format of packets containing only Bluetooth location data.
Explains packets for positioning failures and error codes.
Command to configure the SOS alert mode (single or continuous).
Command to adjust the data upload interval for different modes.
Command to activate the device's buzzer.
Command to set the device's operational work mode.
Command for detailed configuration of work mode parameters and sensor events.
Command to request the tracker to initiate a location scan.
Command to set the preferred positioning method (GNSS, Wi-Fi, Bluetooth).
Command to request the tracker's current event parameters.
Command to request the device's current status.
Command to reboot the tracker.
Command to enable data collection for temperature and light sensors.
Command to enable the SOS alarm function.
Addresses common problems related to obtaining location data.
Guides on using Bluetooth beacons for positioning.
Factors affecting battery life and estimations.
Troubleshooting steps for battery charging problems.
General| Connectivity | LoRaWAN |
|---|---|
| GPS Module | u-blox M10 |
| Channels | 72 |
| Sensitivity | -167 dBm |
| Interface | UART, I2C |
| Operating Voltage | 3.3 V |
| Ingress Protection | IP66 |
| GNSS | GPS, BeiDou, QZSS |
| Position Accuracy | 2.5 m |
| TTFF (Time to First Fix) | Hot start: 1 s |
| Update Rate | 1 Hz |
| Power Consumption | Tracking: 25mA |
| Operating Temperature | -40°C to +85°C |
| Battery Life | Up to 10 years |
| LoRaWAN Region | EU868, US915, AU915, AS923 |
| Antenna | Built-in |
To Next Page
