seeed studio SENSECAP T1000

Need help?

Do you have a question about the seeed studio SENSECAP T1000 and is the answer not in the manual?

Summary

SenseCAP Tracker T1000 Features and Specifications

Getting Location Data with SenseCAP Tracker

Location Acquisition Methods

Covers GNSS, Wi-Fi, and Bluetooth positioning techniques.

SenseCAP Tracker T1000 Main Functions

Configuring the SenseCAP Tracker via Bluetooth

App Download and Quick Start Setup

Advanced Tracker Parameter Settings

Details setting LoRa parameters, work modes, geolocation, and other configurations.

Binding and Data Verification

Checking Data via SenseCAP App and Portal

Payload Decoding and Data Packet Formats

Uplink Packet Structure and Parsing

Explains the structure of tracker data packets and how they are parsed.

Device Status Packet Details (Event & Periodic)

Key Data Packet Types Explained

Downlink Commands for Tracker Configuration

SOS, Buzzer, and Interval Settings

Explains commands for setting SOS mode, controlling the buzzer, and configuring uplink intervals.

Work Mode and Event Configuration

Details commands for setting work modes and various event triggers.

Location, Parameter, and Device Control Commands

Troubleshooting and Frequently Asked Questions (FAQ)

GPS Location Issues

Addresses problems with GPS data acquisition, including indoor use and antenna placement.

Wi-Fi;Bluetooth Location Display Issues

Bluetooth Positioning Guide

Battery Performance and Charging Issues