What to do if Sega Arcade Game Machines don't activate with the main switch on?
If your Sega Arcade Game Machine doesn't activate when the main switch is on, it could be due to several reasons. First, ensure the machine is correctly plugged in and that the power supply voltage is correct. Also, check the AC main fuse. If it's blown, remove the cause of any overload before replacing the fuse.
Why is the operation of my Sega Arcade Game Machines unsatisfactory?
Unsatisfactory operation of your Sega Arcade Game Machines can stem from a few issues. It might be due to a volume setting failure, poor mesh of the V.R. gear, or spring failure in the Accelerator and Brake Mecha caused by secular change. To address this, perform a volume setting, adjust or replace the V.R., adjust the gear mesh, and replace the spring if necessary.
General| Developer | Hitmaker |
|---|---|
| Publisher | Sega |
| Genre | Racing |
| Mode | Single-player |
| Platform | Arcade, Dreamcast |
| Release Date | 1999 |
| ESRB Rating | T (Teen) |
Checks to perform before powering on the machine.
Steps to level and secure the machine using adjusters.
Guidance on connecting and verifying the power supply.
Procedure for checking the assembled machine's functionality.
Details the switch unit controls and coin meter functions.
Explains the system test mode for IC board checks and settings.
Describes accessing and using the game test mode menu.
Tests the status and VR values of control panel switches.
Checks the status of lamps in the output test.
Procedure for adjusting or replacing the volume control.
Adjusting or replacing the volume control for pedals.
To Next Page
