Sega Out Run - Page 19

1.
TEST
OPERATION
(1)
Push the
test switch
and
Fig.
1
will
be
shown on
the
screen
.
(2) Select
CONTINUE
or
INDIVIDUAL
by
using the START button.
DIAGNOSTIC
-A> [CONTINUE]
MEMORY
TEST
INPUT TEST
OUTPUT
TEST
MOTOR
TEST
SOUND
TEST
CRT
TEST
DIP SW.
ASSIGN
BOOKKEEPING
BACKUP
RAM
CLEAR
EXIT
SELECT
BY
STEERING
PUSH
TEST
BUTTON/
(3)
Move the
steering
to
bring the
arrow
to the
desired position.
FIG.
1
[CONTINUE]
:
o
Bring
the arrow sign
to CONTINUE
first,
and move it to one of the
tests to start.
Push
the TEST
button, and the tests will
be
performed in order,
one
by one,
starting from
the test where
the arrow
was
originally set
to
EXIT.
o
If the START
button is
pushed when
the
arrow is
at CONTINUE,
it
will
change
to
INDIVIDUAL.
Pushing
it again
returns
it to CONTINUE.
[INDIVIDUAL]:
o
If
the arrow is at INDIVIDUAL
first
and
brought
to
a certain
test
which
you
want
to
conduct, only
that
test
is
performed
by
pushing
the
TEST button.
-
17
-