What to do if Sega Arcade Game Machines won't turn on?
If your Sega Arcade Game Machine isn't turning on, there are a few things to check: * Ensure the power cord is firmly plugged into the outlet. * Verify you're using the correct power source and voltage. * If a circuit protection device was activated due to overcurrent, remove the cause of the overcurrent, reset the device, and fix the item that caused the overcurrent.
Why is there no sound coming from my Sega Outrun 2 Arcade Game Machines?
If you're not getting any sound from your Sega Arcade Game Machine, consider these potential causes: 1. The sound volume may be set too low or muted. Adjust the volume setting. 2. There may be a malfunction with the BD and Amp. Perform a Sound Test to check it. 3. The connector connection may be incorrect. Check the connector connection from the Base to the Speaker.
What to do if Accel & Brake Pedals don't work on Sega Arcade Game Machines?
If the Accel & Brake Pedals on your Sega Arcade Game Machine aren't working right, it could be due to the following: * The VR position might be deviated. Adjust the VR value in the TEST MODE. * The VR might be malfunctioning. Replace the VR. * The ADJUST GEAR’s engagement might not be correct. Adjust the adjustment of ADJUST GEAR.
How to fix a Sega Outrun 2 Arcade Game Machines steering wheel that isn't working well?
If the steering wheel on your Sega Arcade Game Machine isn't working properly, check these potential issues: * Steering Wheel deviation. Adjust Volume value in the TEST MODE. * Steering Wheel Volume malfunctioning. Replace the Volume. * ADJUST GEAR’s engagement is not correct. Adjust the engagement of ADJUST GEAR.
Why does the screen image sway or shrink on my Sega Outrun 2?
If the on-screen image of your Sega Arcade Game Machine monitor sways or shrinks, the power source and voltage may not be correct. Make sure that the power supply and voltage are correct.
How to correct the colour image on Sega Outrun 2?
If the color image on the screen of your Sega Arcade Game Machine is incorrect, it may be due to incorrect monitor adjustment. Make appropriate adjustments.
What to do if the fluorescent lamp(s) in my Sega Arcade Game Machines don't light up?
If the fluorescent lamp(s) in your Sega Arcade Game Machine aren't lighting up: * The fluorescent lamp(s) may need replacement. Replace the fluorescent lamp(s). * The connector may be disconnected. Check connections.
What to do if SHIFT LEVER doesn’t operate well on Sega Arcade Game Machines?
If the SHIFT LEVER on your Sega Arcade Game Machine isn’t operating satisfactorily, the switch may be malfunctioning. Replace the switch.
Checks to ensure safe transport and readiness for operation before powering on.
Care and precautions during handling and installation to ensure player safety.
Details on approved coin handling options and installation procedures.
Identification of major parts of the arcade cabinet with dimensions and weight.
Lists all parts included in the installation kit for the machine.
Instructions for safely packing and shipping the game board for repair.
Step-by-step guide for assembling the arcade machine components.
Steps for safely connecting the machine to the mains power supply.
Tests to perform after assembly to ensure correct functioning.
Tests RAM and ROM on game boards for proper functioning.
Checks the operation of steering, gas, brake, and other input devices.
Safe procedures for moving the arcade machine to prevent damage or injury.
Maintenance procedures for the control panel, including steering and shifting.
Procedure for replacing the volume potentiometer or adjusting its gear mesh.
Maintenance for the shift lever, including switch replacement and greasing.
Maintenance for the accelerator and brake pedal assembly.
Adjusting or replacing the volume potentiometer in the pedal assembly.
Procedure for replacing fluorescent lamps, including safety precautions.
Procedures for handling, removing, and replacing the game board.
Instructions for safely replacing the main board battery.
Lists common problems, their causes, and suggested countermeasures for the machine.
Lists fuse types, locations, and replacement guidelines for machine protection.
Schedule and items for periodic checks and maintenance to ensure safe operation.
Explains basic game controls for starting, accelerating, and braking.
Overview of the game's premise, objectives, and modes of play.
Describes the sequence of events and player choices within the game.
Process for selecting cars and changing car colors within the game.
Explains the different game modes available to the player.
Describes the mode focused on fulfilling the lady's requests to raise her heart meter.
Rules and options for multiplayer versus gameplay.
How to activate special modes like 'No Handicap' and 'Player Only'.
Techniques for advanced driving and hidden commands.
Instructions on how to perform drifting maneuvers during gameplay.
Brief profiles of the main characters featured in the game.
Explains the purpose and function of various tests available in Test Mode.
Details the function of internal switches and coin meters on the VTS PCB.
Guide to entering and using the system test mode for diagnostics and settings.
Tests the functioning of memory ICs on the game board.
Allows setting system options like cabinet type, language, and display.
Configures coin-to-credit ratios for common coin chute types.
Manually sets coin-to-credit ratios, bonus adder, and coin chute multipliers.
Accesses specific game tests for input, output, and configuration.
Checks the status and smooth operation of input devices like steering and pedals.
Adjusts game difficulty, language, cabinet type, and network settings.
Information on linking multiple machines for network play.
Explains VTS board function for game credits and setting play prices.
Switch settings for configuring play prices and bonuses for UK currency.
Switch settings for configuring play prices and bonuses for Euro currency.
Hierarchical breakdown of major assemblies and their components.
List of components for the top assembly of the Outrun 2 unit.
List of components for the framework assembly.
List of components for the CC Box assembly.
List of components for the control panel assembly.
List of components for the installation kit.
Code for wire colors used in the electrical schematics.
Contains the detailed electrical schematics for the machine.
General| Brand | Sega |
|---|---|
| Model | Outrun 2 |
| Category | Arcade Game Machines |
| Language | English |
To Next Page