5.4. Game Test Mode
[IMPORTANT]
When changing the game configuration, changes will not be enabled until the Game Test Mode
has been completed. Be sure to exit the Game Test Mode properly after configuration changes.
Select GAME TEST MODE from the System Menu screen to display the Game Test Menu screen as
follows.
Use the SERVICE Button to move the cursor to the desired test item. Press the TEST Button to enter the
selected item.
NOTE: In Upright cabinet types, the DRIVE BOARD TEST is not necessary and the option will not be
displayed.
After selecting an item, read the explanations below regarding operation.
After the test is complete, move the cursor to EXIT and press the TEST Button to return to the System
Menu screen.
To Next Page
Loading...
Need help?
General
