3.7.5.3. Input Test
Select INPUT TEST from the menu screen in either System Test mode or Game Test mode.
Test the STEERING, GAS (ACCEL) and BRAKE controls to ensure that they are functioning properly and
that the parameters change smoothly as each input device is operated.
Display N, UP and DOWN using the GEAR POSITION. N displays that there is no control input. Verify that
both UP and DOWN display in sync with the position of the shift knob.
Press the START, CHANGE VIEW, SERVICE and TEST Buttons. If functioning correctly, each indicator
will switch from OFF to ON.
Press the SERVICE and TEST Buttons simultaneously to return to the Game Test Menu screen.
JVS TEST
INPUT TEST
NODE 1/1
SYSTEM 00
PLAYER 1 1 0000
PLAYER 2 2 0000
COIN 1 1 0000
COIN 2 2 0000
ANALOG 1 0000
ANALOG 2 0000
ANALOG 3 0000
ANALOG 4 0000
ANALOG 5 0000
ANALOG 6 0000
ANALOG 7 0000
ANALOG 8 0000
To Next Page
Loading...
Need help?
General
