3.16. PERIODIC CHECK AND INSPECTION
The items listed below require periodic check and maintenance to retain the performance of the machine
and ensure safe operation:
• Be sure to check annually to see if the power cords are damaged, the plug is
securely inserted and that there is no dust in the interior of the machine or
between the socket and the power cord. Using the product in an unclean
condition may cause a fire or electric shock.
DESCRIPTION WHAT TO CHECK INTERVAL
CABINET Check Adjusters’ contact with surface Daily
Clean CRT face - (Do Not use water jet) Weekly MONITOR
Check settings Monthly
GAME BD Setting check Monthly
CONTROL PANEL Input test Monthly
Speaker, sound Sound test, check volume adjustment Monthly
Coin insertion test Monthly COIN SELECTOR
Cleaning Tri-Monthly
POWER SUPPLY CORD Check condition Annually
INTERIOR Clean (Do Not use water jet) Annually
CABINET SURFACE Clean (Do Not use water jet) As required
3.17. Cleaning The Cabinet Surfaces
When the cabinet surfaces are badly soiled, remove stains with a soft cloth dipped in water or chemical
detergent (diluted with water) and squeezed dry - DO NOT USE A WATER JET. To avoid damaging
surface finish, do not use such solvents as thinner, benzene, etc. (other than ethyl alcohol), abrasives or
bleaching agents.
To Next Page
Loading...
Need help?
General
