5.3.1. RAM Test
The memory test mode is for automatically
checking the on-board memory IC functioning.
“GOOD” is displayed for normal IC’s and “BAD “
for abnormal IC’s
• When the test is completed, if the results are
as shown on the left then the Game Board is
satisfactory.
• The test should take approximately thirty
seconds to complete. If the test exceeds this
time the board may have malfunctioned.
• After finishing the test press the TEST
BUTTON or START BUTTON to exit.
5.3.2. JVS Test
•
In this test, functioning of the I/O Board
connected to the Game Board is displayed,
and INPUT TEST can be performed. Select
EXIT to return to the MENU screen, or select
INPUT TEST to display the second screen.
Select EXIT to return to the MENU screen.
To Next Page
Loading...
Need help?
General
