3.6. Shipping The Media Board
When sending the Media Board for repairs, follow the specifications below and
request repairs or send the Board to your retailer/the repair centre.
Not following the specifications may result in the board not being accepted or in
extra charges being made. Also, mistaken handling can damage or result in loss of
parts.
• Be sure to use the special purpose carton box included with this product.
• Do not remove the Key Chip. Send the board with the Key Chip attached.
• Undo the 10 screws holding the Media Board to the Main Board and pack the
Media Board. Do not carry out any disassembly or part removal other than that
specified in this manual.
• Pack the Media Board in the special purpose carton box as shown in the
explanatory diagram.
• The packing material in the carton box has a shock absorbing function. Be sure
to use it when packing. Do not bend or fold the material in a direction other than
that shown on the diagram.
•
Do not pack any wires, cables, or screws together with the Board.
• Be sure to attach the special purpose carton box accessory sticker
"843-
ãããã
B."
To Next Page
Loading...
Need help?
General
