4 5
To return to the title screen at any point during game play, simultaneously press and
hold
the , , , and Start Buttons on the Dreamcast Controller or the , and
Start
Buttons on the Rally Wheel.
RALLY WHEEL (Sold separately)
▲ Use the Rally Wheel for precise handling of the car.
▲ The Rally Wheel is not compatible for use with the Jump Pack.
Memory Card
(Visual Memory Unit –
sold separately)
Button: Handbrake
(Mode Select: Enter)
Start Button
:
Start/Pause
Trigger : Accelerator
(Analog input)
Trigger : Brake
(Analog input)
Button
:
Change viewpoint
(Mode Select: Cancel)
Steering Wheel
(Analog input)
(Mode Select: )
–
Button: Shift
down
(Mode Select: )
+
Button: Shift up
(Mode Select: )
CONTROLS
▲ Never touch the Analog Thumb Pad, Triggers / , Steering Wheel or the Levers / while
turning the Dreamcast power ON. Doing so may disrupt the controller initialization procedure and
result in malfunction.
▲
If the analog controls have been accidentally moved while turning the power ON, immediately
turn the power OFF and ON, making sure not to touch the Dreamcast Controller or Rally Wheel.
▲ Sega Rally 2 is a 1 to 2 Player game.
▲ Be sure to connect a controller to a Control Port, before turning ON the power.
▲ The button configurations can be altered (see Options p.10). The configurations shown on
p.4 and p.5 correspond to Type A.
▲ It is possible to adjust the analog controls, see Calibration p.10.
Memory Card
(Visual Memory Unit –
sold separately)
Button: Shift down
Button:
Change viewpoint
Button: Handbrake
(Mode Select: Cancel)
Button: Shift up
(Mode Select: Enter)
Start Button: Start/Pause
Analog Thumb Pad
: Steering
(Analog input)
: Mode Select
Directional Pad
(D-Pad)
: Steering
: Mode Select
Trigger : Brake
(Analog input)
Trigger : Accelerator
(Analog input)
Sega Rally 2 is compatible for
use with the Jump Pack (sold
separately). Insert the Jump
Pack into Expansion Socket 2
of the Dreamcast Controller.
Jump Pack
To Next Page
Loading...
Need help?
General
