06 07
4 Assembling Your KickScooter
3. Install six screws (two on each side)
with the included hex wrench.
4. Verify that your KickScooter can be
powered on and off.
2. Firmly connect the wires inside the
handle and the stem. Slide the handle
onto the stem. Be aware of the correct
orientation.
Headlight
toward front
1. Unfold the handlebar stem and fasten
it. Then unfold the kickstand to
support the KickScooter.
5 First Ride
There are safety risks when learning to ride the KickScooter. You must read the
Riding Safety via the App before your first ride.
For your safety, your new KickScooter is not activated and will beep occasionally after
Power ON.
Until activated, the KickScooter maintains very low riding speed, and cannot be ridden
with full function. Install the App on your mobile device (with Bluetooth 4.0 or above),
connect to the KickScooter with Bluetooth, and follow the App instructions to activate
your KickScooter and enjoy the full performance.
Scan the QR code to download the App.
21
Install the App and register/login. Power on the KickScooter. A blinking
Bluetooth icon indicates the KickScooter is
waiting for a connection.
3
4
Click “Vehicle”→“Scan for Vehicle” to connect to
your KickScooter.
The KickScooter will beep when the connection
is successful. The Bluetooth icon will stop
blinking and remain illuminated.
Follow the App instructions to active the KickScooter and learn how to ride safely.
You can now start to use your KickScooter, check the status with App, and interact with other
users. Have fun!
Vehicle Fans Moments MeDiscover
Segway-Ninebot App
2
1
To Next Page
Loading...
Need help?
General
