0201
Diagram
Dashboard
EN
Speedometer: Display the current speed of the KickScooter, as well as to display error codes.
Speed Mode: Three modes available.
"ECO" for Energy saving mode (smooth acceleration, suitable for beginners).
"D" for Standard mode.
"S" for Sport mode (powerful, only recommended for skilled riders).
Bluetooth: The icon indicates that the KickScooter has been successfully connected to the mobile device.
Error: The wrench icon indicates that the KickScooter has detected an error.
Battery Level: The battery power is indicated by 5 bars, each representing approximately 20% of a full battery.
Power Button: Press the button to turn the KickScooter on; press and hold the button for 3 seconds to turn the KickScooter
off. When the KickScooter is on, press the button to turn the headlight and rear light on/off; press twice to switch between
speed modes.
Walk Mode: Max. speed is 3.1 mph (5 km/h).
* How to enable in the Segway-Ninebot App: Tap the slide menu > Settings > Walk Mode.
Temperature Indicator: The thermometer icon always on indicates that the battery temperature has reached 122°F (50°C) or
is below 32°F (0°C).
* At this point, the vehicle cannot accelerate normally and may not be charged. Do not use it until the temperature is lowered
to normal range.
Walk Mode
Speedometer
Speed Mode
Bluetooth
Error
Battery Level
Power Button
Temperature Indicator
Headlight
RU
Rear Light
To Next Page
Loading...
