Segway SE-3 Patroller - Riding: Stepping On;Stepping off

33
Info SE-3 Setup Operate Riding
Tips
Battery Maintain T-shoot Warn Contact
Index Schedule
Riding: Stepping On/Stepping Off
WARNING
Read and understand the SE-3 Patroller User Manual before attempting to
ride. Always wear a helmet when riding the SE-3 Patroller.
Stepping On
1. Ensure the Segway SE-3 Patroller is unplugged and the Parking
Brake is engaged (p. 38).
2. Ensure the Power key is OFF.
3. Ensure the DRIVE/STANDBY switch is set to STANDBY ( ).
4. Step onto the Rider Detect Mat (Figure 25).
Stepping Off
1. Ensure the SE-3 Patroller is at a complete stop and on level ground
when possible.
2. Switch to STANDBY mode ( ).
3. Engage the Parking Brake (p. 38).
4. Turn the Power key OFF.
5. Step off the Rider Detect Mat (Figure 25).
Figure 24: ALWAYS Wear a Helmet!
Figure 25: Stepping On/Stepping Off