26
User Interface/Display
User Interface Buttons
The User Interface (Figure 14) features an LCD with three buttons at the
bottom of the display surround. On vehicle power-up, an initialization screen
displays, then turns into a virtual "dashboard." The Display button ( )
cycles through three display brightness levels. The Left button ( ) cycles
between kilometers and miles display units. The Right button ( ) performs
a "tripmeter" function: press the button to reset trip distance to zero. Note
that the buttons are deactivated when the vehicle is travelling over 3 mph.
WARNING
Do not become distracted by, or attempt to interact with, the User Interface
Display while riding. Doing so could result in serious personal injury and/or
vehicle damage.
User Interface Display
The User Interface "dashboard" (Figure 15) displays the following information
to the rider:
• Battery charge level/charge screen (p. 52)
• Various messages/warnings (p. 73)
• Rider Present indication
• Drive mode: "D" = DRIVE, "N" = Neutral (STANDBY) , "R" = REVERSE
• Torque gauge
• Speedometer/Odometer/Tripmeter
Figure 14: User Interface/Display
Display
Display button
Left
button
Right
button
99999.9 999.9OD TRIP
MPH
15
RND
RIDER PRESENT
To Next Page
Loading...