Segway SE-3 Patroller - Page 89

87
Info SE-3 Setup Operate Riding
Tips
Battery Maintain T-shoot Warn Contact
Index Schedule
Recommended Maintenance Schedule–SE-3 Patroller (cont.)
Maintenance procedure: 1x/month 1x/4months 1x/6months 1x/12months
Power on SE-3. Ensure operability and document hours/miles

Test ride SE-3, note wheel alignment, drift, or performance issues

Inspect Motor/Gearbox elastomer and coupling
2

Replace components and update software as necessary
3
Replace brake fluid every 2 years
Replace tires (see "Tire Wear" below) as necessary
Tire Wear
Excess tire wear is determined as follows:
• Front – tire tread depth is less than 2 mm
• Rear – tire tread depth is less than 3.8 mm
See "Checking Tires for Wear" (p. 61) for more information on tire wear.
Key:  = required;
2
= Performed by Level 2 trained Segway Certified Technician only;
3
= Performed by Level 3 trained Segway Certified Technician only