SEH myUTN-52 - User Manual

USB Device Server
User Manual
myUTN-50
myUTN-52
myUTN-54
Dongleserver myUTN-80
SDCardserver myUTN-120
Scannerserver myUTN-130
myUTN-150

Summary

1 General Information

myUTN

Provides an overview of myUTN functionality for accessing non-network-ready USB devices.

Your Safety

Outlines safety regulations, intended use, and warnings to prevent misuse and damage to devices and people.

First Steps

2 Administration Methods

Administration via the myUTN Control Center

Explains how to administer and monitor the UTN server using the web-based myUTN Control Center interface.

Administration via the SEH UTN Manager

Details using the SEH UTN Manager software for accessing and managing USB devices connected to the UTN server.

Administration via the InterCon-NetTool

3 Network Settings

How to Configure IPv4 Parameters

Details configuring IPv4 parameters for optimal integration of the UTN server into a TCP/IP network.

How to Configure IPv6 Parameters

How to Configure WLAN (myUTN-54 only)

4 Device Settings

How to Control the Access to Dongle-Protected Software (only myUTN-80) or USB Devices (only myUTN-150) via VLAN

Explains how to use VLANs to control access to dongle-protected software or USB devices for security and performance.

5 Working with the SEH UTN Manager

How to Add USB Devices to the Selection List

How to Connect a USB Device to a Client

Guides on establishing a connection between a client and a USB device via the UTN server using the SEH UTN Manager.

How to Cut the Connection between the USB Device and the Client

How to Automate Device Connections and Program Starts

Details various automatisms for automating device connections and program launches with the SEH UTN Manager.

How to Manage Selection Lists for Several Participants

6 Security

How to Define the Encryption Level for SSL;TLS Connections

How to Control Access to the myUTN Control Center

Details methods to protect administrative access to the myUTN Control Center via web and SNMP using passwords and VLANs.

How to Control Access to the UTN Server (TCP Port Access Control)

Guides on controlling access to the UTN server by locking TCP ports and defining exceptions for specific network elements.

How to Control Access to USB Devices (only myUTN-80 and later)

Explains methods for controlling access to USB devices via port key control and device assignment.

How to Use Certificates Correctly

Details the use of certificates (self-signed, CA) for data encryption and partner authentication in the UTN server.

How to Use Authentication Methods

Describes supported authentication methods like IEEE 802.1x, EAP, and RADIUS for network access control.

How to Encrypt Data Transfer

Guides on enabling SSL/TLS encryption for data transfer between clients and USB devices via the UTN server.

7 Maintenance

How to Secure UTN Parameters (Backup)

How to Reset the UTN Parameters to their Default Values

Details how to reset UTN server parameters to factory default settings via Control Center or reset button.

How to Perform an Update

8 Appendix

Troubleshooting

Offers solutions for common problems encountered with the UTN server, such as BIOS mode, connection issues, and password loss.

SEH myUTN-52 Specifications

General

Category	Server
Network Interface	10/100/1000 Mbps Ethernet
Power Supply	5V DC, 2A
Supported Protocols	HTTP, HTTPS, DHCP, SNMP
Network	Ethernet