Need help?Do you have a question about the SEH myUTN utnserver Pro and is the answer not in the manual?
Provides an overview of the UTN server, its purpose, and system requirements for operation.
Details available documentation resources, including guides, manuals, and online help for the UTN server.
Lists contact information, support hours, and regional support details for SEH Computertechnik GmbH.
Outlines safety regulations, intended use, improper use, and warnings to ensure safe operation.
Provides a sequential guide for initial setup, covering hardware installation, software setup, and basic configuration.
Explains access and usage of the utnserver Control Center via web browser or other SEH tools for server management.
Details using the SEH UTN Manager software for establishing and managing connections to USB devices connected to UTN servers.
Describes the SEH Product Manager tool for network-wide administration and management of SEH devices.
Outlines remote administration using email commands for status checks, parameter changes, and updates.
Guides on scanning the network to locate connected UTN servers and USB devices using the SEH UTN Manager.
Explains creating point-to-point connections to USB devices via the UTN server using the SEH UTN Manager.
Describes methods for deactivating USB connections via SEH UTN Manager or automatically.
Details the procedure for requesting access to a USB device currently in use by another client.
Covers features like Auto-Connect, Auto-Disconnect, and Print-On-Demand for automating USB connection management.
Explains checking USB port/device status and configuring automatic status messages.
Describes managing selection lists to control user access to UTN servers and USB devices.
Introduces the 'utnm' command-line tool for managing UTN features without the graphical interface.
Details assigning static or dynamic IPv4 network configurations to the UTN server using SEH tools.
Explains configuring IPv6 parameters for embedding the UTN server into an IPv6 network.
Describes UTN server configuration for VLAN environments, including IP management and client VLAN assignments.
Guides on configuring DNS settings for name resolution and accessing the UTN server via hostnames.
Covers POP3 and SMTP configuration for email-based administration and notifications.
Explains enabling and configuring Bonjour for automatic device detection and service announcements.
Details configuring external server services like WebDAV and syslog-ng for monitoring and backups.
Explains assigning descriptive names to the UTN server for better network overview and identification.
Describes setting the UTN server's device time via its hardware clock or an SNTP time server.
Details configuring UTN ports for unencrypted/encrypted connections and ensuring they are not blocked.
Guides on labeling individual USB ports with additional information for better identification in SEH UTN Manager.
Explains server notifications via status emails and event notifications through email or SNMP traps.
Describes monitoring functions for collecting and exporting system values using WebDAV, Email, or syslog-ng.
Details configuring SSL/TLS encryption strength for secure connections, choosing levels and protocols.
Explains enabling encrypted HTTPS connections to the utnserver Control Center for enhanced security.
Guides on setting up user accounts (admin, USB Manager, read-only) to restrict access to the Control Center.
Describes SNMP configuration for network monitoring and management, including community names and access rights.
Details restricting UTN server access by blocking ports using TCP access control and defining exceptions.
Explains managing digital certificates for authentication and encryption, including various types and installation.
Covers configuring IEEE 802.1X network authentication methods like EAP-MD5, EAP-TLS, EAP-TTLS, PEAP, FAST.
Explains assigning custom names to USB ports for better identification and management in SEH UTN Manager.
Details encrypting all USB and UTN communication using SSL/TLS to secure data transfer.
Describes methods for restricting USB access, including port key control and device assignment by VID/PID.
Guides on hiding protected USB devices from the SEH UTN Manager selection list to simplify the interface.
Explains blocking specific USB device types, such as HID class devices, to prevent potential abuse.
Details deactivating or re-activating USB ports for unused ports or to restart connected devices.
Explains backing up and restoring UTN server configuration parameters using SEH tools.
Guides on resetting UTN server settings to factory defaults via remote access or the physical reset button.
Describes updating the UTN server firmware using files downloaded from the SEH website.
Explains how to manually restart the UTN server via Control Center, SEH Product Manager, or the reset button.
Provides definitions for key terms and concepts used throughout the manual, aiding comprehension.
Offers solutions for common problems encountered with the UTN server, covering connection and visibility issues.
Lists all configurable parameters for various sections like IPv4, IPv6, DNS, POP3, SMTP, etc.
Provides an overview of SEH UTN Manager features and their availability based on selection list mode and user account types.
General| Category | Server |
|---|---|
| USB Ports | 4 |
| USB Ports Type | USB 3.0 |
| Network Protocols | TCP/IP |
| Operating System | Linux |
| Model | myUTN utnserver Pro |
| Network Interface | Ethernet |
To Next Page
